Ganchos para Pendurar Carne em Armários Frigoríficos Comerciais
Um gancho para pendurar carne é o gancho metálico que liga um corte de carne à barra no interior de um...
A meat hanging hook is the metal hook that links a cut of meat to the rod inside a hanging cabinet, so the hook and rod carry the weight together. For the Senlis SLS-GH1200 and SLS-GG1200, the catalog confirms reinforced hanging rods, but not the hooks themselves.
A hanging cabinet stores meat suspended rather than laid on shelves. Two parts do the suspending: the rod, which is fixed to the cabinet, and the hook, which is the only part that touches the meat. Weight travels from the cut to the hook, from the hook to the rod, and from the rod into the cabinet structure.
That chain is only as strong as its weakest link. A reinforced rod does nothing for you if the hook opens under load, and a hook rated for a heavy piece is wasted on a rod that bends. A cabinet-level load figure may describe the rod, the frame, or the whole chain with hooks attached, and the quote has to say which.

Accessory sellers offer several styles. The table lists what to check for each one against the cabinet rod. None of these styles is confirmed as supplied with, or recommended for, the SLS cabinets.
| Hook style | How it holds the cut | Check against the rod |
| S-shaped hook | One end goes through or around the cut, the other end hangs over the rod | Opening width versus rod diameter |
| Hook with top ring or loop | The ring sits on the rod and the hook carries the meat below | Ring inner size versus rod diameter |
| Multi-prong hanger | Spreads the weight over several contact points on a joint | Whether the hanging point clears the rod and neighbouring pieces |
| Swivel hook | Turns under load so the piece can rotate | Whether the swivel joint has its own weight rating, lower than the hook’s |
Both are Senlis armários suspensos para carne. The catalog lists two sizes with load ratings under the two model names, without pairing each size to a model, so confirm which model carries which size when you request a quote.
| Parâmetro | Catalog listing |
| Size and load, option A | 1200 × 750 × 2020 mm, 250 kg load |
| Size and load, option B | 1200 × 1000 × 2200 mm, 500 kg load |
| Temperatura | −18 °C to 8 °C, dual-zone, independently adjustable |
| Refrigeração | Tubo de cobre |
| Hanging | Reinforced hanging rods |
| Isolamento | Espuma mais espessa |
| Interior | Optional LED lighting |
| Base | Optional casters or adjustable feet |
| Personalização | Custom sizes; 110 V, 220 V or 380 V |
Senlis offers OEM/ODM customization on all models, including internal layout (shelves, lighting, controls). Hook configuration is not named in that list, so raise it explicitly.
Pricing is quoted per project — request a quote for your model, quantity, and destination market. No prices are published for the cabinets or for hooks.

Compared with standalone hook listings from accessory retailers, which typically state a length and a weight limit for each hook, a Senlis cabinet listing gives cabinet-level information (size, load option, temperature range, rod type) and leaves the hook to be specified.
The advantage is that the rods and the cabinet come from one factory, and OEM/ODM customization is open on every model, so rod and layout questions go to the party that builds the cabinet.
The cost is specific: until hook specs are confirmed, a buyer sourcing hooks separately has to match opening size, hook rating and rod diameter without a published rod diameter, and a mismatch shows up only when cabinet and hooks first meet. For importers, that means hooks belong on the purchase order as their own line with their own spec.
Q: Do the SLS-GH1200 and SLS-GG1200 come with meat hooks?
A: The catalog lists reinforced hanging rods and does not state whether hooks are supplied. Ask for hook quantity, style and material in the quote.
Q: What load can a Senlis meat hanging cabinet carry?
A: The catalog lists 250 kg for the 1200 × 750 × 2020 mm size and 500 kg for the 1200 × 1000 × 2200 mm size. It does not say whether the figure is a cabinet total or a per-rod limit.
Q: Can I use my own S-hooks in the cabinet?
A: Only if the hook opening clears the rod. The rod diameter is not published, so request it before buying hooks separately.
Q: Can the hanging layout be customized?
A: Senlis offers OEM/ODM customization on all models, including internal layout and custom sizes. Hook and rod arrangement is not named in the catalog, so confirm it with the factory.
Q: What temperature range do the cabinets cover?
A: −18 °C to 8 °C, in two independently adjustable zones.
Send the six questions above through Get Instant Quote with your model, quantity and destination market; we reply to all inquiries within 24 hours. One question this article leaves open is how to plan rod positions and zone use for a specific stock mix, which depends on the layout the factory confirms.
2026-11
Um gancho para pendurar carne é o gancho metálico que liga um corte de carne à barra no interior de um...
2026-11
Escolha o SLS-GH1200 (1200×750×2020 mm, carga de 250 kg) se o seu estoque máximo pendurado se mantiver dent…
Responder-lhe-emos no prazo de 24 horas. Se for um caso urgente, adicione WhatsApp/WeChat: +8617806295551. Ou ligue diretamente para +8617806295551/+8617660987312.
*Respeitamos a sua confidencialidade e todas as informações são protegidas.
Apenas utilizaremos as suas informações para responder ao seu pedido e nunca enviaremos mensagens de correio eletrónico ou mensagens promocionais não solicitadas.