yeni&blog

Kaliteli Soğutmanın Başladığı Yer

17
2026.11

Meat Hanging Hooks in Commercial Refrigerated Cabinets

09:34

A meat hanging hook is the metal hook that links a cut of meat to the rod inside a hanging cabinet, so the hook and rod carry the weight together. For the Senlis SLS-GH1200 and SLS-GG1200, the catalog confirms reinforced hanging rods, but not the hooks themselves.

What a hook does inside a hanging cabinet

A hanging cabinet stores meat suspended rather than laid on shelves. Two parts do the suspending: the rod, which is fixed to the cabinet, and the hook, which is the only part that touches the meat. Weight travels from the cut to the hook, from the hook to the rod, and from the rod into the cabinet structure.

That chain is only as strong as its weakest link. A reinforced rod does nothing for you if the hook opens under load, and a hook rated for a heavy piece is wasted on a rod that bends. A cabinet-level load figure may describe the rod, the frame, or the whole chain with hooks attached, and the quote has to say which.

Four assumptions that go wrong with a load rating

  • Treating rod strength as hook strength. The Senlis catalog lists reinforced hanging rods. It lists no hook, so nothing in it tells you what a hook can hold.
  • Reading the cabinet figure as a per-rod figure. The catalog gives 250 kg and 500 kg load options and does not say whether they are cabinet totals or limits per rod. Until the factory states otherwise, plan around the cabinet total.
  • Assuming any butcher hook fits the rod. The hook opening has to clear the rod diameter. No rod diameter is published, so hooks bought separately cannot be checked against it yet.
  • Assuming hooks ship with the cabinet. The catalog describes the cabinet and its rods. Whether hooks are included, how many, and in what style is not stated.

Et Asma Dolabı

Which hook style fits which rod?

Accessory sellers offer several styles. The table lists what to check for each one against the cabinet rod. None of these styles is confirmed as supplied with, or recommended for, the SLS cabinets.

Hook style How it holds the cut Check against the rod
S-shaped hook One end goes through or around the cut, the other end hangs over the rod Opening width versus rod diameter
Hook with top ring or loop The ring sits on the rod and the hook carries the meat below Ring inner size versus rod diameter
Multi-prong hanger Spreads the weight over several contact points on a joint Whether the hanging point clears the rod and neighbouring pieces
Swivel hook Turns under load so the piece can rotate Whether the swivel joint has its own weight rating, lower than the hook’s

SLS-GH1200 and SLS-GG1200: what the catalog confirms

Both are Senlis et asma dolaplari. The catalog lists two sizes with load ratings under the two model names, without pairing each size to a model, so confirm which model carries which size when you request a quote.

Parametre Catalog listing
Size and load, option A 1200 × 750 × 2020 mm, 250 kg load
Size and load, option B 1200 × 1000 × 2200 mm, 500 kg load
Sıcaklık −18 °C to 8 °C, dual-zone, independently adjustable
Soğutma Bakır boru
Hanging Reinforced hanging rods
İzolasyon Kalınlaştırılmış köpük
İç bölüm Optional LED lighting
Base Optional casters or adjustable feet
Özelleştirme Custom sizes; 110 V, 220 V or 380 V

Senlis offers OEM/ODM customization on all models, including internal layout (shelves, lighting, controls). Hook configuration is not named in that list, so raise it explicitly.

Check these before you order

  • Ask whether hooks are supplied, how many, and in what style.
  • Ask for the hook material and the rated load per hook.
  • Ask for the rod diameter, rod material and spacing between rods.
  • Ask whether the 250 kg or 500 kg rating is a cabinet total or a per-rod limit, and whether it counts the hooks.
  • Ask which rods sit in which temperature zone, since the −18 °C to 8 °C range is split across two independently adjustable zones.
  • Ask whether load test records exist. Senlis states that every unit is tested for cooling stability, energy efficiency and noise level before shipment; a load check is not named in that list.

Pricing is quoted per project — request a quote for your model, quantity, and destination market. No prices are published for the cabinets or for hooks.

Et Asma Dolabı

Cabinet-supplied rods versus loose accessory hooks

Compared with standalone hook listings from accessory retailers, which typically state a length and a weight limit for each hook, a Senlis cabinet listing gives cabinet-level information (size, load option, temperature range, rod type) and leaves the hook to be specified.

The advantage is that the rods and the cabinet come from one factory, and OEM/ODM customization is open on every model, so rod and layout questions go to the party that builds the cabinet.

The cost is specific: until hook specs are confirmed, a buyer sourcing hooks separately has to match opening size, hook rating and rod diameter without a published rod diameter, and a mismatch shows up only when cabinet and hooks first meet. For importers, that means hooks belong on the purchase order as their own line with their own spec.

SSS

Q: Do the SLS-GH1200 and SLS-GG1200 come with meat hooks?

A: The catalog lists reinforced hanging rods and does not state whether hooks are supplied. Ask for hook quantity, style and material in the quote.

Q: What load can a Senlis meat hanging cabinet carry?

A: The catalog lists 250 kg for the 1200 × 750 × 2020 mm size and 500 kg for the 1200 × 1000 × 2200 mm size. It does not say whether the figure is a cabinet total or a per-rod limit.

Q: Can I use my own S-hooks in the cabinet?

A: Only if the hook opening clears the rod. The rod diameter is not published, so request it before buying hooks separately.

Q: Can the hanging layout be customized?

A: Senlis offers OEM/ODM customization on all models, including internal layout and custom sizes. Hook and rod arrangement is not named in the catalog, so confirm it with the factory.

Q: What temperature range do the cabinets cover?

A: −18 °C to 8 °C, in two independently adjustable zones.

Send the six questions above through Get Instant Quote with your model, quantity and destination market; we reply to all inquiries within 24 hours. One question this article leaves open is how to plan rod positions and zone use for a specific stock mix, which depends on the layout the factory confirms.

Bir Teklif Alın

    Size 24 saat içinde cevap vereceğiz. Acil durum için lütfen WhatsApp/WeChat ekleyin: +8617806295551. Veya doğrudan +8617806295551/+8617660987312 adresini arayın.

    *Gizliliğinize saygı duyuyoruz ve tüm bilgiler korunuyor.

    Bilgilerinizi yalnızca sorunuza yanıt vermek için kullanacağız ve asla istenmeyen e-postalar veya tanıtım mesajları göndermeyeceğiz.